- Your cart is empty
- Continue Shopping
Call: +91 9960516771
Art Epoxy 3:1 – Clear Cast Resin
Art Epoxy 3:1 – Clear Cast Resin
₹350.00 – ₹6,020.00
size
1.2kg
Add to cart
Buy Now
Product Description
Mixing Ratio R:H – 3:1
Pot Life At 25° C 90 – 120 Min
Touch Dry 8 – 12 hours
Fully Cured 24 – 36 Hours
Measurement By Weighing Scale
Viscosity At 25° C 500 – 800
Hardness 75 Shore D
Best For Silicon Mould Casting, Deep Casting & Top Coat
Transparency – Crystal Clear with Glass like transparency.
Bubble-Free – Bubble get automatically busted after mixing
Wetting property – Uniformly spread to the surface, resulting in a smooth and even layer without any gaps, shrinkage or bubbles
Consistency – Thin consistency for easy mixing that also improve Mould’s life.
Features – Non-yellowing, Moisture Free, Hard Cure & Conforms to ASTM Rules
For Deep Pour – Description
Layer – 2nd layer pouring after 8-10 hrs.
Casting Thickness – Capable of casting up to 8-10 mm in a single layer.
Deep Pour – Capable of 2-3 inch (60 MM) deep pour in 6-8 layers.
Application – Exercise caution in high humidity, low daylight, and low temperature conditions. – Maintain ambient temperature (20-35°C) and humidity below 65%. – Use vacuum to achieve air-free components in filled molds.
Mixing – Thoroughly mix manually or mechanically to eliminate haziness or streaks.- Mix small quantities to test your ratio
Safety – Wear personal protective equipment (PPE). – Avoid eye and skin contact; wash off with warm water if necessary. – Prevent inhalation of vapors, mist, or gas. Keep hardener bottle closed due to fuming tendency.
Additional Information
| size |
|---|
Reviews
There are no reviews yet.